派克OR型格萊旋轉(zhuǎn)密封圈-Parker OR ROTARY SEALING SET

派克OR型格萊旋轉(zhuǎn)密封圈-Parker OR ROTARY SEALING SET

The rotary sealing set profile OR consists of a wear-resistant and low-friction Polon® (PTFE) sealing ring and an energizing NBR O-Ring.

It is suitable mainly for applications where the pressure alternates from one side of the seal to the other, such as pivots for rotating track rings, swivel joints, hose reels, and in machine tool hydraulics.

Considering the special working conditions, the rotary sealing set profile OR is equipped with one or two circumferential lubricating grooves.

Main advantages:

·         Short assembled length.

·         Minimal break-out and dynamic slide friction. Therefore no stick-slip. Steady movement is guaranteed even at low velocities.

·         Low wear.

·         High extrusion resistance.

·         High temperature resistance.

·         Compatibility with nearly all media due to the high chemical resistance of the rod sealing ring, and a wide selection of O-ring compounds.

·         Available in diameters up to 2500 mm.

Range of Application:

Working pressure          max. 300 bar

Working temperature       -30 / +100 °C

Surface speed             max. 1,0 m/s