2K型特康斯特封-Turcon stepseal 2K

2K型特康斯特封-Turcon stepseal 2K

The single-acting seal element is made of high-grade

Turcon or Zurcon materials with outstanding sliding

and wear resistance properties. It is installed according to

ISO 7425/2 and Trelleborg Sealing Solutions standard

grooves, using an O—Ring as the energizing element

TURCON  STEPSEAL  2K

- Single-Acting -

- O—Ring-Energized Turcon Slipper Seal

Advantages

- High static and dynamic sealing effect

- Stick-slip-free operation for precise control

- High abrasion resistance and high resistance to extrusion

- Long service life

- Simple groove design, one-piece piston possible

- Wide range of application temperatures and high

resistance to chemicals, depending on the choice of

O—Ring material

- Simple installation without seal edge deformation

- Available for all diameters up to 106 inches (2,700 mm)

- Low friction

application engineers for assistance! Patented and patent pending geometry

Application Examples

The Turcon Stepseal 2K is the recommended sealing

element for single-acting pistons in hydraulic components

for:

- Injection molding machines

- Machine tools

- Presses

It is particularly recommended in floating piston

accumulators as the primary seal on the oil side in

combination with AQ-Seal® and AQ-Seal 5.

Materials

Standard Application:

- For hydraulic components in mineral oils containing zinc

or medium with good lubricating performance

Seal ring: Turcon T46

Energizer: O—Ring NBR 70 Shore A or FKM 70

Shore A depending on the

temperature

Set reference: T46N or T46V